PMI – 50 TL
Multifunctional device – The ideal solution for welding thin sheets up to ~1mm thick.
The electric arc is constricted by a copper nozzle, which causes a high power density. The concentrated electronic arc can be achieved in conjunction with the controllable plasma gas, higher welding speeds and a deeper penetration, which saves time and money. The tight bundling of the electric arc and the welding speed causes only a narrow heat-effected zone to form, which has a lower thermal distortion in the component result.
|Technical Specifications||PMI – 50 TL|
|supply voltage||3x 400V AC ± 15% 50 / 60 Hz|
|main connection||CEE plug, 6 mm²|
|welding current (60% ED)||40A|
|welding current (100% ED)||30A|
|control range||0,5 ÷ 50A|
|pilot current (100% ED)||15A|
|control range pilot current||0,5 – 15A|
|protective doctor||IP 21 S|
|manual plasma control||0,2 ÷ 2,5 l Ar/min|
|manual protection gas control||1,0 ÷ 25,0 l Ar/min|
PGR-05: electr. Plasma control, range 0,1 ÷ 5 l/min
SGR-20: electr. Inert gas control, range 0,5 ÷ 20 l/min
high quality of the seam
high process safety
high degree of automation
high productivity due to high welding speed
Micro Plasma welding is used for sheet metal, foils up to 1mm, repair welding or soldering. The micro-plasma method can be used both manually and automatically.